Creality has lengthy been acknowledged as a pioneer within the 3D printing trade, with the Ender 3 being one of the fashionable choices on the market. After the current launch the Ender 3 Neo and S1 printer strains. Creality has returned with the Ender 5 S1 printer. That is an improved model of the Ender 5 printer with a number of notable upgrades.
Creality has been making a number of the best 3D printers on the market at cheap costs for a very long time now, and the Ender 5 S1 continues that custom of providing distinctive high quality on the proper value.
Let’s check out the Ender 5 S1 and see if the 250 mm/s print pace is achievable and produces clear outcomes.
Creality Ender 5 S1: Design & setup
Picture 1 of 9
Just like the earlier Ender 5 fashions, the Ender 5-S1 has a traditional dice design. The mattress strikes up and down, and the hotend is mounted on the highest of the dice body. The very first thing you may discover in regards to the Ender 5 S1 is that the extruder has been changed with a brand new direct drive setup utilizing Creality’s “Sprite” extruder, with a sizzling finish that may attain temperatures of 300 levels Celsius.
The traditional textual content display and dial management are additionally gone, changed by a full-color 4.3-inch contact display with easy-to-see and navigate menus with all of the choices you want to get every part arrange and operating. It has been relocated from the suitable facet of the unit to the middle of the casing, the place the mainboard and different electronics are housed.
What’s within the field
Printer base with contact display
Prime body with direct drive sizzling finish
Printing platform
Z-axis meeting
4 Profile rails
Left and Proper Platform Help Meeting’s
Two Diagonal Braces
Spool Holder
Facet cutters
Wrench, Screwdriver and hex wrenches
Nozzle Cleaner
Metallic Scraper
USB reader and MicroSD
Energy cable
Cable ties
5 Flat Cable Clips
Blue Bowden Clip
Bending harness
200g Spool of Filament
Spare 0.4mm Nozzle
Bowden Tube
Numerous Screws for meeting
Step one within the meeting course of is to safe the 4 profiles to the printer’s base with eight M5x25 screws, guaranteeing that the profiles are sq. and straight. After that, set up the highest meeting utilizing eight of the identical M5x25 screws, ensuring every part is sq. and tight. The next step is to organize the print mattress meeting for set up on the printer body. We used the froth from the field to help the print platform as we connected the mattress to the Z-axis meeting. We set up the printing platform help arms on the underside of the mattress after we safe it to the Z-Axis meeting.
Once you’re prepared to put in the printing platform and Z-axis meeting, you would possibly want a serving to hand to tilt the printer body ahead to make room for the Z-axis meeting. As with the opposite components of the meeting, use the provided M5x30 screws to safe the Z-axis to the body and be sure that every part is tight. Set up the 2 braces on the underside rear of the printer body, noting the R and L on the braces to find out which facet they’re put in on.
All that continues to be is to put in the spool holder on the suitable facet, the Bowden extruder on the filament run out sensor and the direct drive, and at last to attach all of the cables to the suitable plugs. Every plug is labeled, making the ultimate step easy. Lastly, double-check the voltage on the facility provide to make sure it’s set to the right voltage for the nation you reside in.
Picture 1 of 3
As soon as the printer has been assembled, all that continues to be is to plug it in, flip it on, and start by accessing the settings menu and levelling technique. On the Aux.LVL display, first click on on the house icon on the suitable facet. As soon as the mattress is within the prime place, regulate the offset by clicking the up and down arrows till the nozzle simply grabs the paper. After you’ve got set the offset, regulate the mattress by clicking on the 4 corners and manually levelling every nook with the knobs.
The ultimate step, as soon as the mattress has been manually levelled, is to click on on the Auto.LVL tab and click on on Begin. The printer will undergo the levelling course of, checking a number of factors on the mattress. As soon as full, the printer will dwelling the mattress and you might be able to print (after you have loaded your filament of alternative). The included SD card has three take a look at prints to select from as soon as prepared.
You can too purchase an non-compulsory acrylic enclosure that might be out there round launch, and there are plans to combine the Ender 5 S1 into the Creality Sonic Pad, giving customers a Klipper firmware choice that’s straightforward to setup and calibrate with the Sonic pad.
Creality Ender 5 S1: Specs & options
Picture 1 of 5
Key specs
CPU: 32-bit Silent Mainboard
Levelling: Guide + CR Contact Auto-levelling
Construct Quantity: 220x220x280mm
Printer Dimensions: 425x460x570mm
Max printing Pace: ≤250 mm/s
Beneficial printing pace: ≤120 mm/s
Nozzle Temperature: ≤300ºC
Scorching Mattress Temperature: ≤110ºC
Management panel: 4.3-inch shade contact display
Platform: Spring Metal Sheet
Supported filaments: PLA, PETG, ABS, TPU, PC, ASA, HIPS
Web weight: 12.1kg
The Ender 5 S1 is likely to be the best printer for your entire wants given the simplicity of the on-screen menu system, which is filled with all of the choices you want to calibrate and configure the printer to your printing wants.
That is along with all the mandatory options, together with the auto-level system and the inclusion of the 300 Celsius most temperature of the included all-metal warmth break.
Creality additionally plans to combine the Ender 5 S1 into the Creality Sonic Pad, giving customers a Klipper firmware choice that’s straightforward to arrange and calibrate. There may also be an acrylic enclosure out there for the Ender 5 S1, which is able to assist with temperature-sensitive supplies like ABS and add rigidity to the printer body itself.
Creality Ender 5 S1: Print High quality & pace
All through our testing, we caught to utilizing the Creality slicer’s normal profile of 120mm/s. We additionally printed a number of instances with the 250mm/s profile and in each circumstances we could not be happier with the outcomes.
The primary prints we have now are the included take a look at prints. A small rabbit, a fortunate cat, and a benchy boat are amongst them. These fashions have been sliced utilizing the usual 120mm/s profile and turned out fantastically. Due to the twin half cooling duct, there have been no overhang points. There was additionally little to no stringing on the prints, which is without doubt one of the advantages of utilizing a direct drive extruder.
The subsequent print we determined to check on the Ender 5 S1 is an Eastman Captain Picard bust. This mannequin is from his Patreon (opens in new tab) web page. This bust is a two-piece print that features each the bust and the bottom it sits on. For this print, we used Anycubic black matte filament, which has shortly turn out to be certainly one of our favourite PLAs. The print high quality was improbable at 0.16 layer peak and the usual 120mm/s profile. The completed print’s degree of element impressed us. There have been no print points within the remaining print. Every part was spotless, and the ultimate print appeared improbable.
Picture 1 of 4
We then determined to print a Flexi Fox from Flexifactory (opens in new tab). The fox got here out nice utilizing Eryone Universe rainbow PLA and the identical 0.16mm layer peak and 120mm/s profile. As with earlier prints, the mannequin got here out flawlessly. The joints have been versatile and powerful. And the colour shift of the rainbow PLA labored rather well with the fox mannequin. Flexi prints are all the time a favourite to check with and this one got here out nice.
Picture 1 of 2
Following the success of the Flexi Fox Print, we determined to check certainly one of FlexiFactory’s newer fashions, the Flexi Brontosaurus (opens in new tab). The dinosaur turned out simply in addition to the Flexi Fox within the earlier print with no adjustments to the profile. The one distinction this time is that the Eryone Universe rainbow filament has been changed with the Eryone Sweet rainbow filament.
Picture 1 of 2
We then determined to maintain the Eryone sweet rainbow and print the Desert Kiss dice skull from ArsMoriendi3D (opens in new tab). That is a powerful mannequin that doesn’t require any help or helps, making it a wonderful alternative for a take a look at print. With this print, we selected to slice it at 250mm/s utilizing Creality’s really helpful pace settings and a 0.16 layer peak. We have been very happy with the ultimate print outcomes, which took simply over 22 hours to finish.
Picture 1 of 3
And for our remaining take a look at print, we determined to attempt spiralized outer contour mode on a vase. Once more, utilizing the 120mm/s default profile, these vases took simply over 3 hours to finish. We determined to do one within the universe rainbow and one within the sweet rainbow PLA from Eryone for these prints. The rainbow PLA catches and displays mild in a tremendous manner.
Picture 1 of 3
Creality Ender 5 S1: Worth & guarantee
With a retail price of $559 (opens in new tab), the Ender 5 S1 is a improbable 3D printer for builders in search of for an Ender-sized machine. It is sooner than typical Cartesian printers whereas taking on rather less room. That is certainly one of our best 3D printers in the meanwhile as a result of to its CR Contact and all-metal hotend.
The Ender 5 S1 additionally comes with a one-year Restricted Guarantee, although bear in mind that it is solely a three-months Restricted Half Guarantee for consumable components. That is fairly normal for the trade.
Must you purchase the Creality Ender 5 S1?
With the Ender-5 S1, Creality’s Ender sequence maintains its robust repute for producing high-quality printers. It not often disappoints and is a powerful but reliable printer that can win you over to Creality’s facet. It produces improbable prints utilizing the out of the field settings, and we did not have any points with stringing or different print defects throughout a variety of take a look at prints.
Whether or not you are considerably new to 3D printing or a seasoned professional, we will extremely really helpful Ender-5 S1 based mostly on our time with it.
If this product is not for you?
If the Ender 5 S1 is not for you, we advocate wanting into the opposite Ender sequence printers, such because the Ender 3 S1 line, which has three fashions out there – the S1, S1 Professional, and S1 Plus. The S1 is the most cost effective of those with costs starting at $379 (opens in new tab), which is sort of a bit cheaper than the Ender 5 S1.
When you’re in search of a cut price on a 3D printer, whether or not it is FDM like this or a resin mannequin, take a look at our 3D printer deals web page the place we’re consistently including nice offers and financial savings as we discover them.
